Our proprietary technology automatically optimizes power distribution among charging stations. The system evaluates the available connection capacity in real time for maximum charging efficiency.

See how the system automatically distributes energy from the grid (and, with the AC Sensor module, from photovoltaics) between the building and the charging stations so that the main circuit breaker is never overloaded.

Available power: 100 kW (grid) + 0 kW (solar) − 20 kW (building) = 80 kW
Grid load: 42 %
DLM inactive: Grid capacity (80 kW) covers all demanded power (22 kW). Chargers run at full power.
Solar covers 0 kW of total consumption. Solar panels are currently not producing energy.
Simulating current solar panel output.
Facility consumption excluding chargers.
Energy efficiency within reach
Measurement module for dynamic load management of charging stations. Monitors household or business consumption and automatically adjusts charging power to prevent grid overload.

Control unit for large installations
Control unit for complex charging infrastructure. Management of up to 200 charging points with advanced cloud management and grid overload protection.

Static load management distributes available power evenly among charging points regardless of the building's current consumption. Dynamic load management (DLM), on the other hand, monitors total consumption in real time and automatically adjusts charging power to current conditions. This makes charging more efficient and eliminates the risk of grid overload.
No, quite the opposite. Dynamic load management is designed to maximize the use of your existing connection capacity. The system gives the charging stations the power that other appliances are not using at the moment, so a costly power upgrade from your distributor is often not needed at all. The stations and the control module must be on a shared local network.
MyBox AC Sensor is ideal for smaller installations – family homes, small businesses, or apartment buildings with up to 8 charging points. It communicates via WiFi and offers solar management. MyBox Arm Unit is designed for large installations with up to 200 charging points, using reliable Ethernet connection and advanced cloud management for corporate campuses and public parking.
Charging from photovoltaics is handled by the MyBox AC Sensor module, designed for smaller installations. The sensor continuously measures the total draw at the main supply and, in solar mode, raises the charging power according to the PV surplus. You can set charging to surplus-only mode, or a combined mode using both grid and PV energy.
Both modules support HTTP, HTTPS, MQTT, and Modbus/RTU protocols for communication with charging stations and energy systems. AC Sensor uses wireless WiFi (IEEE 802.11 b/g/n), while Arm Unit uses wired Ethernet for maximum reliability in large installations.
DLM brings savings on two levels. First, it often removes the need for an electrical connection upgrade, which can save tens of thousands. Second, with the AC Sensor module it can charge from your own PV surplus, so you draw less electricity from the grid. How much this saves depends on your PV output and on when the vehicles charge.